NTI SSD and Hard Disk Drive Cloning Kit (Version 5)

Description

SSD and Hard Disk Drive Cloning Kit (Version 5)
Complete cloning kit for fast and easy upgrade of your notebook HDD. Software and adapter cable included.
Usage
: Perfect for SSD upgrade for notebook PCs. Also good for full system Backup, and making a duplicate HDD as standby
Package contents
: USB to 2.5" SATA adapter cable, Echo 5 cloning software (CD-ROM and download). Adapter can work with any software.
Versatile
: Echo 5 software works with any USB/SATA adapters. Supports Dynamic Resizing, 1-to-1 Cloning, Dynamic Resize Cloning & Partition Cloning
Powerful
: Able to clone Windows, Linux, Mac, or Windows/Linux/Mac multi-OS partitions* (Please see NOTE below)
NOTE*
: Installed and run from Windows (10, 8.1, 8, 7, Vista or XP), able to clone multi-OS partitions with Windows, Linux and Mac OSX on them. Adapter compatible with USB 3.0 and 2.0, transfer speed up to 6 Gbps. Does NOT support encrypted or dynamic disk types, no support for most types of RAID.
Overview
If you are looking to upgrade your PC's hard drive to a faster solid state drive or to a larger hard drive, then our hassle-free cloning kit is your best choice.
Along with your replacement drive (HDD or SSD) and our Cloning Kit, you'll be all set to upgrade your PC's hard drive. Our kit includes Echo 2019 cloning software and a USB 3.0 to 2.5" SATA adapter cable. The adapter cable is 18cm (7.1 inches) in length, it uses stable and high-performance chipsets to achieve a blazingly fast transfer speed of up to 6 Gbps.
Note: The adapter cable supports only 2.5" SATA replacement drives. The adapter cable does not support 3.5" SATA replacement drives since they require 12 volts to run and USB ports only supplies 5 volts.
The following picture shows the premium ICs inside the adapter. To convert SATA signal into USB signal, many designs use low-cost ICs, resulting in instable transmission and reduced product life. We use state-of-the-art Asmedia ASM1153E, which ensures product quality and stability. The driver storage chip FT25H04S can achieve reading speed up to 120 MHz, it supports fast execution of intelligent firmware, which automatically recognizes the operating system to make a plug-and-play experience.
Here are the simple steps to upgrade your PC's hard disk drive
:
First, plug in your new replacement drive into the SATA connector on our cable. The cable supports 2.5" SATA replacement drives. Note that that adapter cable does not support 3.5" SATA replacement drives since they require both 5 volts and 12 volts to run. USB ports on computers only supply 5 volts.
Next, plug in the USB connector on our cable into your PC. USB ports can be both USB 2.0 and USB 3.0. If you have a "blue" USB port on your PC, then use that one since it means it is a USB 3.0 port which would have a faster transfer rate.
Next, install Echo on to your PC and launch the software.
Simply select the Source drive and the Destination drive and press the Start button. Then sit back and let Echo do the cloning for you, it's really that easy.
Once done, turn off your PC and replace the original drive with your new replacement drive and reboot your PC.
Your PC will boot up normally. You'll just have either a faster PC with a new SSD drive or a lot more storage with a new larger hard drive.
System Requirements
Hardware Requirements
USB 3.0 to SATA Adapter Cable
Connects a 2.5” SATA 3.0 Hard Drive or Solid State Drive to a USB 3.0 or USB 2.0 port on a Windows computer
USB 3.0 supports data transfer speeds up to 5Gbps
Backwards compatible with SATA 1.5Gbps and SATA 3Gbps
Easy and fast setup – No special drivers required
Note:
The adapter cable supports 2.5” SATA replacement drives. The adapter cable does not support 3.5” SATA replacement drives since they require both 5 volts and 12 volts to run. USB ports on computers only supply 5 volts.
PC System Requirements
Hard Disk Space: 100 MB free space available for installation
Supported OS: Windows 10, Windows 8, Windows 8.1, Windows 7, Windows Vista, Windows XP