MAXDIVE Scuba Valve Rebuild Kit ALL Viton O-rings for Yoke Type # KIT-K1

Description

This is a standard scuba valve kit for yoke valve.
Each package includes as follows or shown on the photo,
1. 1pcs stem o-ring,  ID6.07×W1.78, viton (Part # SR08-010V)
2. 1pcs stem teflon gasket, Ø6.3×Ø11.2×1.7mm, teflon (Part # TG07-2T)
3. 1pcs outlet o-ring, ID12.42×W1.78, viton (Part # KR12-014V)
4. 1pcs inlet o-ring, ID24.99×W3.53, viton (Part # IR14-214V)
5. 1pcs bonnet gasket, Ø13.2×Ø16×0.6mm, copper (Part # BG06-2C)
6. 1pcs valve seat&plug assembly, 1/2"-20UNF, brass, teflon coated, PVDF insert (Part # VS10BV-A)
7. 1pcs burst disc assembly, 1/2"-20UNF, SS13mm hex, brass, no-plated thread, one-piece assembly, 3000psi service, 5000psi blow  (Part # BD11-7BP-A5000)
Important Notice: Installation/disassemble of the tank valve must be operated by trained and certified diver to avoid any risk of injury or death. MAXDIVE strongly recommends that you seek out proper training prior to maintenance for oxygen service.