DEDEPU Mini Scuba Diving Kit Underwater 1L Oxygen Tank Hand Air Pump Diving Kit

Description

DEDEPU Mini Scuba Diving Kit Underwater 1L Oxygen Tank Hand Air Pump Diving Kit
Specification:
Material: Aluminum Alloy+ Silicone
Surface Processing: Hard Anodizing & Spraying Treatment
Color: Yellow / Green / Black
Capacity: 0.5L
Length: 350mm
Diameter: 59mm
Pressure: 3000PSI / 200bar / 20MPa
Water Volume: 26.62cu.in/0.42liters
Gas Capacity: 3.0cu ft/85liters
Breathing Number: 170 times (0.5 Liters each time)
Life Span: Resistant to seawater corrosion for over 500hrs.
Features:
Mini, portable, suitable for outdoors and traveling.
57 times breath above water, or 21 times for adults underwater.
The 0.5L oxygen cylinder allows the diver to stay 7 meters underwater for 6-10 minutes (depending on individual lung capacity and depth of diving), perfect for beginners.
Supports 3 types of inflation: Manual high-pressure Inflatable pump, aqualung switch, electric inflator.
Uses aviation aluminum material and meets the manufacturing standards for diving equipment.
Press and hold the top to vent the pressure inside the bottle.
Lightweight and portable design, it can be taken on board after twisting the breathing valve.
Package Includes:
2x Oxygen Cylinder
2x Breathing Valve
1x High High-Pressure Air Pump(sliver)
1x Scuba Adapter
1x Lanyard Rope
1x Nylon Handbag
1x Oxygen Cylinder Holder Bag
1 x Tool Set
1 x User Manual
Work Time:
In 1~3m Deep: 8~10min
In 3~7m Deep: 6~8min
In 7~10m Deep: 5~6min
Three Inflatable Way:
1. Manual high high-pressure air pump (Optional)
2. From the big oxygen bottle. (Not included)
3. Electric pump. (Not included)
Warning:
Please do not use this product before you read and understand the instruction and notes.
This product is suitable for recreational diving gas sources within 10 meters. Do not try to use it as a gas source in deeper waters.
This product can be used as a spare air source for recreational diving within a depth of 30 meters.
Before using this product, t is strongly recommended that you be trained or certified by a recognized certification body in scuba diving technology. The use of this breathing apparatus by uncertified or trained personnel is dangerous and may cause serious injury or death.
This product is suitable for use in waters that are above 10.
Degrees Celsius.
Inflate the product before use and check the product for damage or leakage. Never use products that are damaged, leaking, or showing signs of performance failure.
The maximum canning pressure of this product is 3000PSI, and it can't be used for gases containing more than 40% oxygen. Please use clean and dry compressed air.
Store the product in a cool, dry place away from direct sunlight. Do not store it in the trunk of a car or at a high temperature.
This product is a high-precision product. Please do not disassemble this product at will. Unauthorized disassembly and assembly of this product may damage the product.
Do not use this product separately. Need to be accompanied by two or more people.
When using this product, you must wear emergency rescue equipment. This product does not provide protection when in danger.
After use, please wash the product with clear water.
the pressure gauge indicator reaches the red area, please rise to the surface of the water and use it again after inflation.
First time please practice in the shallow waters.
Warm Prompt:
Before using this product, please carefully read and understand the product manual.
The aeration value of the product shall not exceed 20MPA.
Do not fill gas with an oxygen content greater than 40%.
It will be faster to inflate the product using a matching special switch through a large oxygen tank or an electric pump. A manual inflating pump is used as a backup filling method.
After filling the air, you must release the pressure first! Otherwise, it could be dangerous.