-40%
0.38L 3000Psi Aluminum Air Tank 5/8-18UNF Screw For PCP Paintball Scuba Cylinder
0.38L 3000Psi Aluminum Air Tank 5/8-18UNF Screw For PCP Paintball Scuba Cylinder
0.38L 3000Psi Aluminum Air Tank 5/8-18UNF Screw For PCP Paintball Scuba Cylinder
0.38L 3000Psi Aluminum Air Tank 5/8-18UNF Screw For PCP Paintball Scuba Cylinder

0.38L 3000Psi Aluminum Air Tank 5/8-18UNF Screw For PCP Paintball Scuba Cylinder

$ 15.51

Availability: 52 in stock
  • All returns accepted: Returns Accepted
  • Brand: HPDAVV
  • Item must be returned within: 30 Days
  • Condition: New
  • EAN: Does not apply
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: Does Not Apply
  • UPC: Does not apply
  • Return shipping will be paid by: Buyer
  • Restocking Fee: No

    Description

    Feature:
    Material: Aluminum
    Color: Black
    Tank Height: 295 mm
    Tank Diameter: 50 mm
    Dial diameter: 23 mm
    Capacity: 0.38 Liter
    Max. Pressure: 3000 PSI
    Bottle Mouth Size: 5/8"-18UNF
    Features:
    Output is available 400/800/1000/1200/1500/1800/2200PSI.
    0.38 Liter,threads 5/8"-18UNF Aluminum Paintball HPA Tank with 4500 PSI regulator.
    A perfect aluminum tank for any paintball marker that operates on High Pressure Air.
    Package Included:
    1 x 3000PSI Aluminum Tank (not include Regulator)
    M18*1.5 inlet thread, 0.825 outlet thread, 8mm male quick connector
    Dual safety burst disks for both bottle and downstream safety
    3000psi Mechanical Gauge, Nickel plated brass bonnet
    Dual locking set screws
    Description:
    This high pressure tank is used for air driving cylinder and PCP cylinder, safe and convenience to bring outside for sporting.Its max pressure is 40mpa. It comes with O-rings and other complete accessories and it is suitable for most brand of PCP pistols, rifles and air guns.
    Operation:
    1.Familiarize yourself with the operation procedure. Incorrect procedure may cause damage to your pump or personal injury.
    2.Connect the pump to your gas cylinder. Connect the cylinder head to the pump according to instructions provided by the gas cylinder.
    NOTE:
    Please read and understand your gas cylinder manual before operation of this pump.
    1.Check the discharge valve screw, make sure it is tight.
    2.Use both feet floor to ensure the stability of the pump.
    3.Place your gas cylinder on a mat (make sure the hose is not kinked). To start, pull the handle bar up fast, and then press it down to pressurize your gas cylinder. When the pressure is above 10Mpa, it is normal to feel increasingly more difficult to pump. This indicates that the pressure is building up.
    On Aug-12-21 at 20:19:09 PDT, seller added the following information: